NotcHead Hard Line Clamps
SKU:
$17.95
$17.95 - $24.95
per item
Upgrade from metal line clamps to NotcHead Line Clamps; the easiest way to secure lines and eliminates the need for Z-bends to adjust for fittings.
We have discovered a possible problem with part #1316-6 that you may or may not encounter.
When using these clamps in tandem, (two bolted together using the bolt and small nut we provide), there were some packages put together with the standard larger nut. We had a smaller nut made that fits in the recess of the clamp perfectly, the larger nut will not. This is only a problem when two clamps are bolted together. If you ordered 3/16" Clamps in the past and have the wrong sized nuts please don't hesitate to email me and I will send out the correct nuts asap. Justin@dsrfasteners.com
- Sold in packs of 6
- With all the Hardware needed to mount
We have discovered a possible problem with part #1316-6 that you may or may not encounter.
When using these clamps in tandem, (two bolted together using the bolt and small nut we provide), there were some packages put together with the standard larger nut. We had a smaller nut made that fits in the recess of the clamp perfectly, the larger nut will not. This is only a problem when two clamps are bolted together. If you ordered 3/16" Clamps in the past and have the wrong sized nuts please don't hesitate to email me and I will send out the correct nuts asap. Justin@dsrfasteners.com
quick, safe and professional
Centered set screw means you drill and tap holes right where you want your line to go. Lines easily 'snap in' with a push of your finger and eliminate the need for Z-bends to adjust for fittings.
Made from high strength Copolymer Acetal plastic, NotcHead Line Clamps are heat-resistant with a melting point of 330° F, have low moisture sensitivity, are very wear resistant and easy on painted parts.
After the line is installed, the set screw is completely hidden, giving a clean, elegant look.
For a solid hold we recommend one clamp per 2" to 1 1/2" feet and by any sharp bends in tubing.
NotcHead clamp names are in relation to the hose it is designed to hold. Most hose sizes are named for the Inside Diameter they have so check the list below to see if there is a size our Clamps will fit what you need.
Part# Description Inside Diameter of Clip
Hard Line Series Approx. / Actual
Made from high strength Copolymer Acetal plastic, NotcHead Line Clamps are heat-resistant with a melting point of 330° F, have low moisture sensitivity, are very wear resistant and easy on painted parts.
After the line is installed, the set screw is completely hidden, giving a clean, elegant look.
For a solid hold we recommend one clamp per 2" to 1 1/2" feet and by any sharp bends in tubing.
NotcHead clamp names are in relation to the hose it is designed to hold. Most hose sizes are named for the Inside Diameter they have so check the list below to see if there is a size our Clamps will fit what you need.
Part# Description Inside Diameter of Clip
Hard Line Series Approx. / Actual
- 1316-6 3/16 hardline 3/16” / .1875
- 1416-6 1/4 hardline 1/4" / .250
- 1616-6 3/8 hardline 3/8” / .375
- 1816-6 1/2 hardline 1/2" / .500
- 2316-6 -3AN braided line 1/4" / .234
- 2416-6 -4AN braided line 7/16” / .438
- 2616-6 -6AN braided line 9/16” / .531
- 2816-6 -8AN braided line 5/8” / .620
- 3080-6 1/2 heater hose and #6 A/C 3/4" / .745
- 3100-6 5/8 heater hose and #8 A/C 7/8” / .870
- 3120-6 3/4 heater hose and #10 A/C 1”/.990
- 4500 #6 Firewall ring 3/4” / .780
- 4600 #8 Firewall ring 7/8” / .910
- 4700 #10 Firewall ring 1” / 1.018
