Wire Cable Builder Kit
SKU:
2200
$209.95
$209.95
per item
The NotcHead Wire Cable Clamp Builder Kit is the easy way to have everything you need for your project in one box.
This kit includes 54 Clips, the nuts, fasteners, and Self drilling screws that go to them.
Includes:
- 18 #6 Gauge Wire Cable Clamps
- 18 #4 to #1 Gauge Wire Cable Clamps
- 18 1/0 Gauge Wire Cable Clamps
Quick, Safe and Professional
Centered set screw means you drill and tap holes right where you want your line to go. Lines easily 'snap in' with a push of your finger and eliminate the need for zip ties to run lines in parallel.
Made from high strength Copolymer Acetal plastic, NotcHead Line Clamps are heat-resistant with a melting point of 330° F, have low moisture sensitivity, are very wear resistant and easy on painted parts.
After the line is installed, the set screw is completely hidden, giving a clean, elegant look.
For a solid hold we recommend one clamp per 2" to 1 1/2" feet and by any sharp bends in tubing.
NotcHead clamp names are in relation to the hose it is designed to hold. Most hose sizes are named for the Inside Diameter they have so check the list below to see if there is a size our Clamps will fit what you need.
Part# Description Inside Diameter of Clip
Hard Line Series Approx. / Actual
Centered set screw means you drill and tap holes right where you want your line to go. Lines easily 'snap in' with a push of your finger and eliminate the need for zip ties to run lines in parallel.
Made from high strength Copolymer Acetal plastic, NotcHead Line Clamps are heat-resistant with a melting point of 330° F, have low moisture sensitivity, are very wear resistant and easy on painted parts.
After the line is installed, the set screw is completely hidden, giving a clean, elegant look.
For a solid hold we recommend one clamp per 2" to 1 1/2" feet and by any sharp bends in tubing.
NotcHead clamp names are in relation to the hose it is designed to hold. Most hose sizes are named for the Inside Diameter they have so check the list below to see if there is a size our Clamps will fit what you need.
Part# Description Inside Diameter of Clip
Hard Line Series Approx. / Actual
- 1316-6 3/16 hardline 3/16” / .1875
- 1416-6 1/4 hardline 1/4" / .250
- 1616-6 3/8 hardline 3/8” / .375
- 1816-6 1/2 hardline 1/2" / .500
- 2316-6 -3AN braided line 1/4" / .234
- 2416-6 -4AN braided line 7/16” / .438
- 2616-6 -6AN braided line 9/16” / .531
- 2816-6 -8AN braided line 5/8” / .620
- 3080-6 1/2 heater hose and #6 A/C 3/4" / .745
- 3100-6 5/8 heater hose and #8 A/C 7/8” / .870
- 3120-6 3/4 heater hose and #10 A/C 1”/.990
- 4500 #6 Firewall ring 3/4” / .780
- 4600 #8 Firewall ring 7/8” / .910
- 4700 #10 Firewall ring 1” / 1.018
