- Store
- >
- Line Clamps
- >
- Braided Line Clamps
- >
- Braided Line Clamp Builder Kit
Braided Line Clamp Builder Kit
The NotcHead Braided Line Clamp Builder Kit is the easy way to have everything you need for your project in one box.
This kit includes 60 Clips, the nuts, fasteners, and Self drilling screws that go to them.
Includes:
- 18 AN-3 Clamp (#2316-6)
- 12 AN-4 Clamp (#2416-6)
- 18 AN-6 Clamp (#2616-6)
- 12 AN-8 Clamp (#2816-6)
Made from high strength Copolymer Acetal plastic, NotcHead Line Clamps are heat-resistant with a melting point of 330° F, have low moisture sensitivity, are very wear resistant and easy on painted parts.
After the line is installed, the set screw is completely hidden, giving a clean, elegant look.
For a solid hold we recommend one clamp per 2" to 1 1/2" feet and by any sharp bends in tubing.
NotcHead clamp names are in relation to the hose it is designed to hold. Most hose sizes are named for the Inside Diameter they have so check the list below to see if there is a size our Clamps will fit what you need.
Part# Description Inside Diameter of Clip
Hard Line Series Approx. / Actual
- 1316-6 3/16 hardline 3/16” / .1875
- 1416-6 1/4 hardline 1/4" / .250
- 1616-6 3/8 hardline 3/8” / .375
- 1816-6 1/2 hardline 1/2" / .500
- 2316-6 -3AN braided line 1/4" / .234
- 2416-6 -4AN braided line 7/16” / .438
- 2616-6 -6AN braided line 9/16” / .531
- 2816-6 -8AN braided line 5/8” / .620
- 3080-6 1/2 heater hose and #6 A/C 3/4" / .745
- 3100-6 5/8 heater hose and #8 A/C 7/8” / .870
- 3120-6 3/4 heater hose and #10 A/C 1”/.990
- 4500 #6 Firewall ring 3/4” / .780
- 4600 #8 Firewall ring 7/8” / .910
- 4700 #10 Firewall ring 1” / 1.018
may we suggest
NotcHead Braided Line Clamps
Made from heat resistant Copolymer Aectal.
- Sold in packs of 6
- With all the Hardware needed to mount
NotcHead Soft Line Clamps
Made from heat resistant Copolymer Aectal and sold in 6 packs with bolts, nuts and self drilling screws.
Soft Line Builder Kit
Only a few left!
The NotcHead Soft Line Clamp Builder Kit is the easy way to have everything you need for your project in one box.
This kit includes 54 Clips, the nuts, fasteners, and Self drilling screws that go to them.
Includes:
- 18 1/2" heater hose and #6 AC line Clips (#3080-6)
- 18 5/8" heater hose and #8 AC line Clips (#3100-6)
- 18 3/4" heater hose and #10 AC line Clips (#3120-6)
NotcHead Hard Line Clamps
- Sold in packs of 6
- With all the Hardware needed to mount
We have discovered a possible problem with part #1316-6 that you may or may not encounter.
When using these clamps in tandem, (two bolted together using the bolt and small nut we provide), there were some packages put together with the standard larger nut. We had a smaller nut made that fits in the recess of the clamp perfectly, the larger nut will not. This is only a problem when two clamps are bolted together. If you ordered 3/16" Clamps in the past and have the wrong sized nuts please don't hesitate to email me and I will send out the correct nuts asap. [email protected]
Hard Line Clamp Builder Kit
The NotcHead Hard Line Clamp Builder Kit is the easy way to have everything you need for your project in one box.
This kit includes 60 Clips, the nuts, fasteners, and Self drilling screws that go to them.
Includes:
- 18 of 3/16" (#1316-6)
- 12 of 1/4" (#1416-6)
- 18 of 3/8" (#1616-6)
- 12 of 1/2" (#1816-6)
Wire Cable Builder Kit
Only a few left!
The NotcHead Wire Cable Clamp Builder Kit is the easy way to have everything you need for your project in one box.
This kit includes 54 Clips, the nuts, fasteners, and Self drilling screws that go to them.
Includes:
- 18 #6 Gauge Wire Cable Clamps
- 18 #4 to #1 Gauge Wire Cable Clamps
- 18 1/0 Gauge Wire Cable Clamps
Air Line Clamp Builder Kit
The NotcHead Air Line Clamp Builder Kit is the easy way to have everything you need for your project in one box.
This kit includes 54 Clips, the nuts, fasteners, and Self drilling screws that go to them.
Includes:
- 18 1/4" Air Line Clamps
- 18 3/8" Air Line Clamps
- 18 1/2" Air Line Clamps